What's new in the Kess3 Alientech

New KESS3 Upgrade Package: Reprograms Mercedes-Benz "CPC" control units and new compatible ACM and UDM ECUs dedicated to heavy-duty vehicles. 

You can now work directly in BENCH to reprogram and repair heavy-duty vehicles from leading brands such as Scania, Volvo, Mercedes-Benz, Isuzu, Hino, and many other Asian manufacturers. Plus, with KESS3, you can precisely optimize the performance of Smart and Mercedes-Benz vehicles, unlocking their full potential.

SEE ALL VEHICLES

Improves Performance in Mercedes-Benz

Thanks to this latest update, you can work quickly and precisely, directly via the control unit connector, on Bosch VC1CC001 CPC5 units. This intervention is key to unlocking the true potential of Mercedes-Benz trucks, fully meeting your customers' needs. That's not all: with this new Update Package, you can also operate in "BOOT" mode on Delphi CPC2.6.1, CPC2.10, CPC2.7, CPC2.4, CPC2.3, and CPC2.20 control units equipped in the penultimate generation of Smart and Mercedes-Benz vehicles.

With KESS3, you can work comprehensively on the control units of these vehicles, increasing performance, efficiency, and reducing fuel consumption.

KESS3 for Trucks

This development marks a significant advance in the heavy-duty vehicle sector, with support for the Bosch EGC4.0 ECUs used in Scania natural gas (CNG) trucks and the Delphi DCM6.24 and Denso 275700-1762 ECUs found in vehicles from Asian brands (Dongfeng, Faw Jiefang, Foton, Huanghai, KAMA, Nanjun, Shanghai GM Wuling, Sinotruk and Yunnei) as well as Isuzu. In addition, the launch includes the Continental ACM SPC564A70 and Bosch RBA1DGS1 ECUs for Volvo and Hino vehicles, expanding the possibilities for intervention in combustion aftertreatment systems.

KESS3 allows you to offer customized solutions, improving efficiency and performance while meeting your customers' specific needs. Investing in KESS3 not only expands your workshop's technical potential but also ensures the rapid and cost-effective interventions demanded by the market.

Choose KESS3 for your workshop: work with a single tool and grow your business in a constantly evolving sector that offers daily opportunities for your workshop.

 

ECU - BENCH/BOOT

•  Bosch VC1CC001 CPC5
• Bosch EGC4.0
•  Delphi DCM6.24
•  Delphi CPC2.6.1
•  Delphi CPC2.10
•  Delphi CPC2.7
•  Delphi CPC2.4
•  Delphi CPC2.3
•  Delphi CPC2.20
•  Denso 275700-1762

ACM - BENCH/BOOT

•  Continental ACM SPC564A70

 

UDM - BENCH/BOOT

•  Bosch RBA1DGS1

Choose KESS3 to offer a comprehensive and highly customized remapping service, giving your workshop a competitive advantage and new revenue opportunities while building customer trust. KESS3 allows you to optimize the efficiency and performance of small and large engines, tailoring them to the specific needs of compatible vehicles.

•  Bosch VC1CC001 CPC5

MERCEDES-BENZ 

RD, WR in Bench Mode

 

ACTROS 7.1L 260kW/354HP Diesel 260kW

ACTROS 7.1L 235kW/320HP Diesel 235kW

ACTROS 7.1L 220kW/299HP Diesel 220kW

ACTROS 7.1L 200kW/272HP Diesel 200kW

ACTROS 7.1L 175kW/238HP Diesel 175kW

ATEGO 7.1L 260kW/354HP Diesel 260kW

ATEGO 7.1L 235kW/320HP Diesel 235kW

ATEGO 7.1L 220kW/299HP Diesel 220kW

ATEGO 7.1L 200kW/272HP Diesel 200kW

ATEGO 7.1L 175kW/238HP Diesel 175kW

AXOR 7.1L 260kW/354HP Diesel 260kW

AXOR 7.1L 235kW/320HP Diesel 235kW

AXOR 7.1L 220kW/299HP Diesel 220kW

AXOR 7.1L 200kW/272HP Diesel 200kW

AXOR 7.1L 175kW/238HP Diesel 175kW

CITARO 7.1L 260kW/354HP Diesel 260kW

CITARO 7.1L 235kW/320HP Diesel 235kW

ECONIC 7.1L 260kW/354HP Diesel 260kW

ECONIC 7.1L 235kW/320HP Diesel 235kW

ECONIC 7.1L 220kW/299HP Diesel 220kW

ECONIC 7.1L 200kW/272HP Diesel 200kW

ECONIC 7.1L 175kW/238HP Diesel 175kW

INTOURO 7.1L 235kW/320HP Diesel 260kW

INTOURO 7.1L 231kW/310HP Diesel 235kW 

SEE MORE

March 27, 2024

UPGRADE 1.92

Work to improve performance or for repair purposes on the newly supported ECUs for Triumph, KTM, and Ducati brands. Thanks to this new development, you can expand your customer base in the two-wheeler sector by offering a comprehensive remapping service on the latest production motorcycles.

New compatible ECUs:

• Keihin 6001-19PE-002
• Keihin RH850
• Continental Siemens VDO M3C S12X256SV
• Continental Siemens VDO M3C S12XET256MAL

It unlocks the full potential of these engines installed in both the 2-stroke and 4-stroke motorcycles involved in this development. But that's not all. It also clones Ducati Continental Siemens VDO M3C S12X256SV and Continental Siemens VDO M3C S12XET256MAL ECUs.

• Keihin 6001-19PE-002

KESS3

BIKE

BOOT MODE

TRIUMPH

RD, WR in Boot Mode

 

• Keihin RH850

KESS3

BIKE

BOOT MODE

KTM

RD, WR in Boot Mode

 

• Continental Siemens VDO M3C S12X256SV

 

• Continental Siemens VDO M3C S12XET256MAL

KESS3

BIKE

BENCH MODE

DUCATI

RD, WR and Clone in Bench Mode

 

• Continental Siemens VDO M3C S12X256SV

 

• Continental Siemens VDO M3C S12XET256MAL

KESS3

BIKE

BENCH MODE

GAS GAS

RD, WR in Bench Mode

KESS3

BIKE

BENCH MODE

HUSQVARNA

RD, WR in Bench Mode

KESS3

BIKE

BENCH MODE

KTM

RD, WR in Bench Mode

 

• Continental Siemens VDO M3C S12X256SV

 

• Continental Siemens VDO M3C S12XET256MAL

KESS3

BIKE

BOOT MODE

GAS GAS

RD, WR in Boot Mode

KESS3

BIKE

BOOT MODE

HUSQVARNA

RD, WR in Boot Mode

KESS3

BIKE

BOOT MODE

KTM

RD, WR in Boot Mode

March 20, 2024

UPGRADE 1.91

Thanks to the eight new protocols available in KESS3, you can bench-test Denso 112731-5040, Denso 112800-3288, Denso 275236-0011, Denso 279721-3830, Denso ZYE9, Denso L831, Denso 112331-0380, and Denso 33910-057LX engine control units. Work on dozens of Japanese-made vehicles to satisfy your customers.

New supported ECUs:

• Denso 112731-5040
• Denso 112800-3288
• Denso 275236-0011
• Denso 279721-3830
• Denso ZYE9
• Denso L831
• Denso 112331-0380
• Denso 33910-057LX

Choose KESS3 and take advantage of the opportunity to increase performance, reduce fuel consumption, or repair issues by working on new compatible ECUs. It even works for cloning purposes on Denso 112731-5040, Denso L831, and Denso 112331-0380 engine control units.

• Denso 112731-5040

KESS3

CAR

BOOT MODE

SUBARU

RD, WR and Clone in Boot Mode

 

 

• Denso 112800-3288

KESS3

CAR

BENCH MODE

SUBARU

RD, WR in Bench Mode

 

 

• Denso 275236-0011

KESS3

CAR

BOOT MODE

LEXUS

RD, WR in Boot Mode

KESS3

CAR

BOOT MODE

TOYOTA

RD, WR in Boot Mode

 

 

• Denso 279721-3830

KESS3

CAR

BENCH MODE

MAZDA

RD, WR in Bench Mode

 

 

• Denso ZYE9

KESS3

CAR

BENCH MODE

MAZDA

RD, WR in Bench Mode

 

 

• Denso L831

KESS3

CAR

BENCH MODE

MAZDA

RD, WR and Clone in Bench Mode

 

 

• Denso 112331-0380

KESS3

CAR

BENCH MODE

SUBARU

RD, WR and Clone in Bench Mode

KESS3

CAR

BENCH MODE

SUZUKI

RD, WR and Clone in Bench Mode

 

 

• Denso 33910-057LX

KESS3

CAR

BENCH MODE

SUZUKI

RD, WR in Bench Mode

March 13, 2024

Remapping of engine mounts on several Benelli, CF Moto, Honda, Kawasaki, Suzuki and Yamaha motorcycles

Work with eight new protocols dedicated to two-wheeled vehicles and satisfy your customers.

UPDATE 1.90

Works effectively on Mitsubishi 21175-1124/1125, Denso 32910-10LXX, Denso BXX-8591A-XX, Keihin 38770-MXX, Keihin 38770-MXX-AXX-DXX, Mitsubishi F8T9647X, Denso 32920-41GXX and Delphi MT05.3 ECUs. Build your business in the performance field and beyond by working on all aspects of the new supported ECUs' management file.

New ECUs:

• Mitsubishi 21175-1124/1125
• Denso 32910-10LXX
• Denso BXX-8591A-XX
• Keihin 38770-MXX
• Keihin 38770-MXX-AXX-DXX
• Mitsubishi F8T9647X
• Denso 32920-41GX
• Delphi MT05.3

Modify engine parameters according to your customers' needs to optimize performance or unleash their full potential. Choose KESS3 to launch your motorcycle remapping business and expand your workshop's reach.

• Mitsubishi 21175-1124/1125 KAWASAKI

 

• Denso 32910-10LXX SUZUKI

 

• Denso BXX-8591A-XX YAMAHA

• Keihin 38770-MXX HONDA

• Keihin 38770-MXX-AXX-DXX HONDA

• Mitsubishi F8T9647X SUZUKI

• Denso 32920-41GX SUZUKI

• Delphi MT05.3 BENELLI, BRIXTON, CF MOTO, KEEWAY MOTOR, MOTRON, SWM

Activate the MOTORCYCLE – BENCH/BOOT package and work on new compatible vehicles immediately. Remember, the KESS3 update

April 12, 2023

Reads and writes via OBD to Transtron L4KX ECUs fitted to late model Isuzu D-Max and MU-X.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.47

Only with KESS3 can you work on the Transtron L4KX ECUs equipped in the Isuzu D-Max and MU-X models with complete reliability and in the shortest possible time. Adjust the parameters of the 1.9-liter turbo diesel engine and develop your business opportunities.

Focus on the new supported ECU:

• Transtron L4KX

Improve performance, repair, and reduce fuel consumption. With KESS3, it's never been easier to offer a truly comprehensive service to your customers, all with just one tool.

• Transtron L4KX

Discover the calibration secrets of this ECU and invest your time in recalibration – KESS3 provides the rest.

April 19, 2023

Works on Arbos 5100 and Landini REX3 equipped with Denso MB275700-2753 control unit.

With this new protocol dedicated to the agricultural world, you can work with complete reliability thanks to KESS3's BENCH mode.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.48

Develop important new business opportunities by working 360° on the Denso MB275700-2753 ECUs installed in Arbos and Landini small and medium-sized tractors. Satisfy your customers by guaranteeing unique, fast, and reliable service for their work vehicles.

New ECU supported:

• Denso MB275700-2753

Take advantage of the latest developments for KESS3 and diversify your work from tuning to repair. Reprogram all types of vehicles with the most advanced hardware and achieve improved performance while optimizing fuel consumption through accurate calibration.

• Denso MB275700-2753

TREES

LANDINI

Activate Truck/Tractor BENCH and BOOT protocols and develop your revenue opportunities with new supported vehicles, including ECU cloning.

 

April 26, 2023

Reads and writes via OBD the Bosch ME(G)17.9.1x, Bosch ME(G)17.9.21 and Bosch ME(D)(G)17.9.8 control units that are installed in thousands of Hyundai and Kia cars.

Proceed with the fastest and easiest way to repair, improve performance, and save on gas.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.49

With the new protocol available for KESS3, you can efficiently work with Bosch ECUs powered by some small and medium-sized Hyundai/Kia gasoline engines. Create business opportunities by reprogramming dozens of new supported vehicles via the OBD port, with maximum reliability.

Focus on these ECUs:

• Bosch ME17.9.1x
• Bosch MEG17.9.1x
• Bosch ME17.9.21
• Bosch MEG17.9.21
• Bosch ME17.9.8
• Bosch MED17.9.8
• Bosch MEDG17.9.8

Offer faster, more comprehensive service for any type of vehicle that enters your shop. Meet your customers' demands every day thanks to the performance and ease of use of KESS3.

• Bosch ME17.9.1x HYUNDAI, KIA

• Bosch MEG17.9.1x HYUNDAI, KIA

• Bosch ME17.9.21 HYUNDAI, KIA

•  Bosch MED17.9.8 HYUNDAI, KIA

•  Bosch MEDG17.9.8 HYUNDA

Take advantage of the technological advantages at your disposal and take action in the field of reprogramming.

May 3, 2023

Reprogram Kawasaki Z900 (MY 18-19) and Z1000 (MY 14-16) using the new KESS3 BOOT and BENCH protocols.

Work on available ECUs with a single tool, meeting your customers' needs.

UPGRADE 1.50

Works reliably with the KESS3 bench mode connection (both BENCH and BOOT) on the Denso 21175-1307/1362 and Denso 21175-0853/0861/0863 ECUs fitted to Kawasaki's extreme naked motorcycles. Become a calibration specialist by customizing your riding style on an ever-growing and constantly updated fleet of motorcycles.

New supported ECUs:

• Denso 21175-1307/1362
• Denso 21175-0853/1362/0863

Modify engine parameters according to the operating logic of each individual control unit, improve performance, and discover growing profit opportunities in the two-wheel field.

•  Denso 21175-1307/1362 KAWASAKI

•  Denso 21175-0853/1362/0863 KAWASAKI

Activate BENCH and BOOT protocols to work on motorcycles and start remapping immediately!

May 10, 2023

Reads and writes via OBD the Delphi DCM3.3 and Cummins CM2350A ECUs that equip JCB and Sonnebogen Tractors off-highway vehicles.

Thanks to these two new protocols, you'll be able to work on an ever-growing fleet of vehicles more quickly and easily, with just one tool.

UPGRADE 1.51

Create new business opportunities by working in a niche market dedicated to tuning or repairing vehicles used for handling, such as JCB Telehandlers. You can now read and write engine parameters on many new vehicles with the simplicity and efficiency of a single connection via the OBD-II connector.

New supported ECUs:

• Delphi DCM3.3
• Cummins CM2350A

Meet your customers' needs with KESS3: offer a comprehensive, fast, and reliable reprogramming service. Take advantage of the opportunity to work on different types of vehicles to achieve improved performance and reduce fuel consumption.

•  Delphi DCM3.3 JCB

•  Cummins CM2350A SONNEBOGEN TRACTORS

Activate OBD truck/tractor protocols and work immediately on new compatible vehicles.

May 17, 2023

It works 360° in the Continental SID807 control unit, which is fitted to some Ford models with 1.6 TDCi engines.

Works with a single protocol on dozens of new supported vehicles, thanks to the latest development of KESS3.

UPGRADE 1.52

Develop new profitable opportunities by working with KESS3's bench mode, both for tuning and repair, on the Continental SID807 ECU that manages the engine parameters of some Ford models, such as: C-Max, Focus, Galaxy, Mondeo, S-Max, Tourneo Connect and Transit Connect.

New ECU supported:

• Continental SID807

Choose KESS3 to operate with a single tool, with total reliability, meeting your customers' demands, thanks to a service that has never been so comprehensive on dozens of vehicles produced between 2010 and 2015.

•  Continental SID807 FORD

This BENCH protocol also supports cloning.

May 24, 2023

TCU Bosch DQ200 Gen II: Reprograms the gearbox of a large number of VAG group vehicles via OBD!

It works faster and more efficiently in managing the DSG transmissions of many Audi, Seat, Skoda, and Volkswagen vehicles.

Upgrade 1.53

Thanks to the new protocol available for KESS3, you can reprogram second-generation DSG DQ200 dual-clutch automatic transmissions via OBD. Discover how to increase your sales opportunities by working with some of the latest VAG Group models. Gain new customers thanks to the new, improved calibration service for both tuning and repairs.

New compatible TCUs:

• Temic DQ200 Gen II

Delight your customers with comprehensive, reliable, all-in-one service for thousands of compatible ECUs and TCUs. Boost performance, repair, and reduce fuel consumption on dozens of vehicles that come into your shop every day.

•  Temic DQ200 Gen II AUDI SEAT SKODA VOLKSWAGE
• Temic DQ200 Gen II

The evolution and improvements of the DQ250 are the result of technological advances in the DQ200 DSG gearbox. The initial design wasn't exactly the same gearbox we imagine today, especially in terms of performance and reliability. However, thanks to this update, it has become one of the VAG Group's "dual-clutch" gearboxes with the most applications on the market, especially for small and medium-sized cars powered by small turbocharged gasoline engines with TSI/TFSI technology.

This gearbox is installed transversely in both front-wheel drive and all-wheel drive vehicles, enabling the vehicle to develop a maximum torque of over 250 Nm, distributing power through its 7:1 ratio. The DQ200 is also the first DSG automatic transmission to adopt two dry clutches combined with a primary and secondary shaft that control the even and odd gears.

By using the Titanium ECM to calibrate this TCU, the performance of the vehicle in which it's installed can be easily increased. By reducing shift times and RPM changes, optimal results can be achieved in terms of both performance and fuel consumption reduction.

May 31, 2023

Reprograms, even with the unit in BOOT, the Delphi DCM3.3 ECUs that equip JCB brand all-terrain vehicles.

A new update allows you to work on this ECU at 360° thanks to the KESS3 BOOT mode.

UPGRADE 1.54

You can now work on the Delphi DCM3.3 ECU in your preferred mode (OBD or BOOT), depending on the processing required by your customer. Due to high demand, we have developed a solution that allows you to work, even for cloning purposes, on vehicles in this niche market.

New ECU also available in BOOT mode:

• Delphi DCM3.3

Increase your revenue opportunities by meeting all your customers' needs while ensuring reliability and efficiency. With KESS3, you offer a truly comprehensive reprogramming service with a single tool for dozens of compatible ECUs and vehicles.

•  Delphi DCM3.3 JCB

Enables BENCH and BOOT protocols for trucks/tractors and works with the new compatibility mode on JCB vehicles.

June 7, 2023

Reads and writes via OBD Denso 39199-4ADN0 ECUs installed in Hyundai vans and Denso 275722-4810 4N14 ECUs in Mitsubishi L200.

Works quickly to optimize engine performance and reduce fuel consumption.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.55

Two new OBD protocols allow you to reprogram Denso 39199-4ADN0 and 275722-4810 4N14 ECUs easily and reliably. Works on the 2.5 CRDi engines found in Hyundai models such as the Starex, H1, H300, Huiyi, and I800, and the latest-generation 2.2 DI-D engine found in the iconic Mitsubishi L200.

Supported ECUs:

• Denso 39199-4ADN0
• Denso 275722-4810 4N14

Satisfy dozens of new customers and increase your profit opportunities with KESS3. Learn how to operate with a single tool, offering personalized service in all areas of programming, including repairs.

•  Denso 39199-4ADN0 HYUNDAI

•  Denso 275722-4810 4N14 MITSUBISHI

Activate OBD protocols and immediately work on new compatible vehicles, in this particular case also for reading and writing EEPROM memory.

June 14, 2023

Reprograms Bobcat Track Loader loaders with Delphi DCM3.7AP SH72546 ECU using BOOT mode.

We're introducing a new protocol designed specifically for the heavy machinery industry: achieve comprehensive control with KESS3.

UPGRADE 1.56

Diversify your business by working on different types of vehicles, including the Bobcat T870 compact track loader. Discover how you can optimize their performance in terms of reliability and fuel efficiency. With this update, you can now work with an open ECU for cloning purposes, providing an additional service to your customers.

New ECU supported:

• Delphi DCM3.7AP SH72546

Choose to reprogram with KESS3, the most advanced hardware yet, allowing you to work safely and efficiently with a single tool, supporting and constantly adding thousands of vehicle models.

•  Delphi DCM3.7AP SH72546 BOBCAT

Activate the Truck/Tractor BENCH and BOOT protocols and increase your revenue by expanding your customer base.

June 21, 2023

Reprograms the latest generation of Vespa scooters (and more) equipped with the IAW MIU4 XC2765 ECU.

A new protocol for KESS3 is dedicated to the most iconic two-wheeled motorcycles of all time.

UPGRADE 1.57

Reads and writes directly to the ECU via the diagnostic connector with maximum reliability and efficiency for these modern motorcycles. Customizes the riding style on Vespa scooters of all engine sizes, from 125cc to high-performance 300cc models, as well as on the Piaggio Beverly, Moto Guzzi V9, and Italjet Dragster equipped with IAW MIU4 XC2765 electronics.

New ECU:

• IAW MIU4 XC2765

Create your own remapping idea and modify engine parameters based on this ECU's operating logic, optimizing engine performance. Discover the opportunities the motorcycle industry offers with KESS3.

•  IAW MIU4 XC2765 ITALJET MOTO GUZZI PIAGGIO

Activate BIKE-OBD protocols to reprogram and provide immediate support for dozens of new motorcycles.

June 28, 2023

Works in BOOT mode on Delphi DCM7.1B ECUs installed in Peugeot Boxer and Citroen Jumper MY2019 vehicles.

It also works with the new protocol to clone ECUs.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.58

Gain more job opportunities by offering expanded services in your workshop with this latest development dedicated to PSA Group light commercial vehicles. Read, write, and clone with an open ECU and discover all the secrets contained within.

New ECU compatible in BOOT mode:

• Delphi DCM7.1B

Get the most out of KESS3 and meet your customers' demands by unlocking their engines' full potential and reducing fuel consumption. But that's not all: you can also work in the repair field, maximizing your range of interventions.

•  Delphi DCM7.1B CITROEN PEUGEOT

Offer a more comprehensive service thanks to KESS3. Expand your client network every day. Alientech will always be by your side to provide you with new protocols and everything you need to perform at your best.

July 5, 2023

Reprogram Kamaz trucks with Cummins CM2350A ECU via OBD!

Thanks to the latest development for KESS3, your possibilities in the field of heavy-duty vehicles are expanding.

UPGRADE 1.59

Now you can satisfy owners of Kamaz 53605 trucks with fast and efficient service via the OBD port. You'll be able to work on the Cummins CM2350A ECUs that manage the renowned 6.7L turbo diesel engine to achieve increased performance and reduced fuel consumption.

New compatible ECU:

• Cummins CM2350A

Take advantage of this opportunity to establish your market value and increase your earning potential, not only in the heavy-duty vehicle sector but across all vehicle types.

•  Cummins CM2350A KAMAZ

 With KESS3, you don't have to limit yourself to performance customization; you can also participate in repairs, expanding your customer base.

July 12, 2023

Works in BENCH mode on Denso ECU 39110-05205, installed in Hyundai EON MY2015.

Make sure you provide the best service with complete reliability to your customers.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.60

Thanks to KESS3's BENCH mode, you can read and write the first-generation Hyundai EON ECU completely safely, directly from the ECU connector. Meet your customers' requests with a single tool that can work on thousands of vehicles that come to your workshop.

New compatible ECU:

• Denso 39110-05205

Take advantage of this to increase engine performance and reduce fuel consumption in these widely used vehicles, especially in Asian and South American countries.

•  Denso 39110-05205 ​​HYUNDAI

Enables CAR-BENCH/BOOT protocols to work on an extensive list of vehicles, including this new protocol.

July 19, 2023

Reprograms the Bosch ME17.3.0 control unit installed in Abarth, Fiat and Alfa Romeo vehicles through OBD.

Thanks to this exclusive development for KESS3, you can work again on this control unit through the vehicle's diagnostic port.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.61

Our development team has released a new protocol for modifying the Bosch ME17.3.0 ECU. It improves engine performance in the easiest and fastest way on dozens of FCA Group models. Unlock the ECU by applying a patch in bench mode, and after this operation, you'll be able to read and write data via OBD forever.

Details about the new switchboard:

• Bosch ME17.3.0

It works on cars with high modification and tuning potential, elevating the level of service offered with KESS3. It ensures complete customer satisfaction with excellent calibration on Abarth 595 and 695, Alfa Romeo Mito and Giulietta, and Fiat Ottimo, Viaggio, Tipo, Mobi, and 500L.

•  Bosch ME17.3.0 ABARTH ALFA ROMEO FIAT

Choose KESS3 to always work with new protocols that allow you to improve your business in each vehicle category.

July 26, 2023

Works on bench in BOOT mode on Bosch MED17.8.10.1 and Bosch MED17.8.10 control units.

They work on the latest MG models to optimize performance, repair, and reduce fuel consumption.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.62

Thanks to two new protocols available in KESS3, you can work with unlocked ECUs on select MG vehicles such as the HS, EHS, and ZS. You can also perform repairs on Geely Boyue, Ford Territory, and Saic MG MG6 using the same connection method. This allows you to expand your customer base by reprogramming dozens of new vehicles arriving at your workshop.

ECU Details:

• Bosch MED17.8.10.1
• Bosch MED17.8.10

With KESS3, you offer a complete service for any type of vehicle, meeting your customers' daily demands. Take advantage of the technological advantage you have with the new updates: a step forward for your business!

•  Bosch MED17.8.10.1 FORD, MG, SAIC, MG

•  Bosch MED17.8.10 GEELY, MG

Push the limits of reprogramming with the security of having the pioneering company in this field at your side. Feel confident whether you're in the tuning or repair industry.

August 9, 2023

Reprograms Porsche Cayenne and Panamera equipped with Continental SDI8 ECUs and Maserati Grancabrio with Bosch MED9.1.1 control units.

Connect KESS3 directly to the ECU connectors and satisfy your customers' needs.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.64

Maximizes performance in SUVs and Porsche-branded passenger cars equipped with the 4.8-liter V8 engine, including turbocharged versions. They also work with the electronic management of the 4.7-liter Maranello engine fitted to the 2017 Maserati Grancabrio. Customize your driving style in these four-wheeled gems thanks to BENCH mode: safe and fast for your intervention.

New ECUs available:

• Continental SDI8
• Bosch MED9.1.1

Choose KESS3, the chiptuning tool designed for professionals, which will help you boost your business in both high-performance cars and any other type of vehicle. Discover all the calibration secrets and improve performance or fuel efficiency.

•  Continental SDI8 PORSCHE MASERATI

It also works on repairs of Bosch MED9.1.1 control units, for which the cloning function is available.

August 30, 2023

Reads and writes via OBD the Bosch EDC17C69 ECU equipped in some FCA Group vehicles.

It operates on Alfa Romeo, Fiat, Opel, and Jeep vehicles to improve performance, perform repairs, and reduce fuel consumption.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.65

The new OBD protocol developed for the Bosch EDC17C69 ECU allows for the simplest and fastest reprogramming of dozens of FCA Group models with Multijet engines, manufactured between 2014 and 2021. The first time, apply the patch to the bench (in BOOT mode) to permanently unlock reading and writing through the diagnostic port. Create new business opportunities with this advantage and increase your workshop's performance.

Details about the new switchboard:

• Bosch EDC17C69

Offer a fast and effective service that meets your customers' diverse demands. Only with an active KESS3 subscription will you have access to ongoing developments that will keep you ahead of the competition.

•  Bosch EDC17C69 ALFA ROMEO, FIAT, JEEP, OPEL

Activate CAR protocols – OBD/BENCH/BOOT and discover how you can work on all supported ECUs using your preferred connection method, whether for tuning or repairs.

September 6, 2023

Works in BENCH mode on marine engines equipped with Bosch EDC16CP34 and Bosch EDC16UC40 control units.

Thanks to two new protocols dedicated to the nautical sector, you can now read, write, and clone ECUs quickly and securely.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.66

Create new job opportunities in a rapidly growing niche market focused on marine engine optimization and repair. Choose to work with KESS3 to safely reprogram Deutz TCD 2015M and Hyundai S-series engines without risking ECU damage, directly from the control unit connector.

New control units supported:

• Bosch EDC16CP34
• Bosch EDC16UC40

It offers a complete remapping service: with KESS3 and the technological advantage at your disposal, you can optimize performance, reduce fuel consumption, and, in this case, also perform ECU cloning.

• Bosch EDC16CP34
•  Bosch EDC16UC40 HYUNDAI SEASALL

•  Bosch EDC16UC40 DEUTZ MARINE

Take advantage of this opportunity and activate the BENCH/BOOT Marine protocols. Start working immediately with the new supported ECUs and grow your business.

September 13, 2023

Reprograms off-road vehicles equipped with Deutz engines and the Bosch EDC16UC40 electronic control unit, and the Iveco Vertis equipped with the Bosch DCU15C167 ECU.

It works thanks to two new protocols for reprogramming and cloning, all through the KESS3 bench and boot modes.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.67

By meeting the specific needs of each customer, especially those related to specialized vehicles, you'll increase the value of your workshop. Use "BENCH" mode for the Bosch EDC16UC40 electronic control unit, common in Deutz off-road vehicles; and "BOOT" mode for the Bosch DCU15C167 equipped in the Iveco Vertis. Optimize performance, reduce fuel consumption, and offer unbeatable comprehensive service, including electronic control unit cloning.

Our latest supported electronic control units:

• Bosch EDC16UC40
• Bosch DCU15C167

Working with KESS3, the most advanced hardware, guarantees safe intervention on thousands of compatible electronic control units. Stay up to date with the latest KESS3 news with Alientech.

•  Bosch EDC16UC40 ARTEC, BELARUS, BERTHOUD, CLAAS, DEUTZ, HUDDING, SHAFFER, RMH, LACHISH

 

•  Bosch DCU15C167 IVECO

Increase your revenue by getting into the remapping business. Activate the Truck/Tractor BENCH and BOOT protocols to unlock the potential of these vehicles.

September 20, 2023

Bosch 6TXX and 6LXX TCU: Reprograms GM Automatic Transmissions in BENCH Mode.

Works safely and effectively on transmission control units (TCUs) fitted to numerous Buick, Cadillac, GMC, and Chevrolet vehicles.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

Upgrade 1.68

Thanks to two new protocols dedicated to TCU remapping, you can now remap GM automatic transmissions with Bosch 6T70, 6T75, 6T80, and 6L45, 6L50, 6L80, and 6L90 TCUs. Choose KESS3 and discover how to expand your services to your customers and increase your business opportunities. Work to repair or improve the performance of hundreds of vehicles now available in Alientech Suite.

New TCUs:

• Bosch 6T70
• Bosch 6T75
• Bosch 6T80
• Bosch 6L45
• Bosch 6L50
• Bosch 6L80
• Bosch 6L90

Meet your customers' needs with a single tool for ECU and TCU reprogramming and activate CAR-BENCH/BOOT protocols to immediately begin working on these newly supported control units.

•  Bosch 6T70 BUICK, CADILLAC, CHEVROLET, GMC

•  Bosch 6T75 BUICK, CADILLAC, CHEVROLET, GMC

•  Bosch 6T80 CADILLAC

•  Bosch 6L45 CADILLAC, CHEVROLET, GMC

•  Bosch 6L80 CADILLAC, CHEVROLET, GMC

•  Bosch 6L90 CADILLAC, CHEVROLET, GMC

September 27, 2023

Reprogram the most extreme Kawasaki Ninja models and the new Brixton Cromwell 1200 via OBD.

Work with two new motorcycle-specific protocols to meet your customers' needs quickly and effectively.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.69

Ensures complete reliability for the Mitsubishi MH8115F ECU fitted to the Kawasaki Ninja ZX-10R and H2 models. It reads directly from the ECU connector and writes via OBD. It also reads and writes via OBD to the Magneti Marelli IAW ECU fitted to the Brixton Cromwell 1200: create your ultimate calibration and improve performance on these newly supported motorcycles.

New ECUs:

• Mitsubishi MH8115F
• Magneti Marelli IAW 11MP

Modify engine temperature based on your customers' different needs, respecting the characteristics of each ECU and optimizing performance with maximum safety. Explore the world of motorcycle remapping and expand your workshop's horizons.

•  Mitsubishi MH8115F KAWASAKI

•  Magneti Marelli IAW 11MP BRIXTON

 Choose KESS3 and activate the BIKE package to start working on these new vehicles immediately, increasing your workshop's sales opportunities.

October 4, 2023

Works in bench and boot mode on Delphi DCM6.2AP, Denso PX43 and Denso Gen III R7F701216 ECUs.

Three new protocols have expanded the KESS3 vehicle list, allowing you to work on newly supported vehicles from Isuzu, Mazda, and Toyota.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.70

Reprogram directly from the ECU connector on select Mazda models with Skyactiv-G engines and off-road vehicles such as the Lexus LX and Toyota Land Cruiser. You can also work in bench mode with KESS3 on the newly launched Isuzu Taga, even with an open ECU. This versatility adapts to your customers' needs, from reprogramming to repairs.

New supported ECUs:

• Delphi DCM6.2AP
• Denso PX43
• Denso GEN III R7F701216

Choose KESS3 and take advantage of the opportunity to work on these new vehicles, expanding your customer base. Explore the technologies that power these ECUs and grow your business.

•  Delphi DCM6.2AP ISUZU

•  Denso PX43 MAZDA

•  Denso GEN III R7F701216 TOYOTA, LEXUS

Activate CAR – BENCH/BOOT protocols and stay ahead of the competition with access to new developments.

October 11, 2023

Reads and writes via OBD Keihin and Continental ECUs installed in KTM and Husqvarna cross/enduro motorcycles.

We've developed two new workshop protocols tailored to off-road enthusiasts.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.71

Work faster and more reliably via OBD on dozens of KTM models with the Keihin 79641031000 ECU and 4-stroke engines, including EXC, SX, XC, Freeride, SMR, and Rally. Plus, you can now work on the Continental M4C ECUs fitted to the latest KTM and Husqvarna models with 2-stroke engines. Expand your customer base with more efficient service and explore new business opportunities with these new developments.

New supported ECUs:

• Keihin 79641031000
• Continental M4C

Thanks to KESS3, you can now unleash the full potential of these legendary off-road engines faster than ever, meeting your customers' demands with ease.

•  Keihin 79641031000 KTM

 

•  Continental M4C KTM, HUSQVARNA

Choose MOTO activation on KESS3 and start working on these two-wheeled gems right away!

October 18, 2023

Reprograms via OBD the Delphi DCM7.24 ECUs found in the latest JCB work vehicles.

Ultra-fast reading and writing in dozens of vehicles, all with reliability and efficiency.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.72

Thanks to this new OBD protocol, you can now work on the Delphi DCM7.24 ECU to meet the demands of your customers working with these types of vehicles, and do so faster than ever. Take advantage of KESS3's full capabilities to reprogram an ever-growing fleet of JCB vehicles—an incredible advantage for your business opportunities.

New compatible ECU:

• Delphi DCM7.24

Improve performance, perform repairs, and reduce fuel consumption risk-free by offering a personalized reprogramming service with a single tool. Only with KESS3 can you work on heavy-duty and work vehicles with a single activation. Take advantage of this opportunity for your business.

•  Delphi DCM7.24 JCB

Activate OBD protocols for trucks/tractors and start working on the latest compatible vehicles immediately.

October 25, 2023

Reprograms in bench (BENCH mode) the Mitsubishi ECUs equipped on Kawasaki and Suzuki motorcycles from 125cc to 1400cc.

Work effectively with dozens of new models now supported and meet the needs of your customers.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.73

Work safely on Mitsubishi 21175-1591/1369 and 21175-0131 ECUs installed in the recent Kawasaki Z-125 and Ninja 125, as well as in the impressive GTR 1400. It also works on Mitsubishi 32910-11L00 ECUs found in the new Suzuki 650cc (V-Strom and SV) and Burgman 400. Choose KESS3 to increase your job opportunities in the world of two wheels, with maximum reliability.

New supported ECUs:

• Mitsubishi 21175-1591/1369
• Mitsubishi 21175-0131
• Mitsubishi 32910-11L00

Optimize performance, reduce fuel consumption, and repair your vehicle with your own remapping, sometimes without even having to remove the ECU. Take advantage of this worry-free work and dedicate your time to other vehicles arriving at your workshop.

•  Mitsubishi 21175-1591/1369 KAWASAKI

•  Mitsubishi 32910-11L00 SUZUKI

Stay up-to-date with the latest Alientech developments by having an active subscription on your KESS3 and choose to activate the BIKE package to work as soon as possible on the new compatible motorcycles.

November 1, 2023

Reprograms the Bosch EDC15C7 and Bosch EDC17C72 ECUs, the Bosch ZF 6HP19 TCU and the Bosch EDC16CP34 ECU in BENCH mode.

Works to reprogram and repair ECUs and TCUs installed in Honda and Hyundai vehicles.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.74

Four new KESS3 protocols allow you to operate directly from the control unit connector on the newly supported models, such as the Honda City, Hyundai Genesis (for the transmission), Hyundai Veracruz/iX55, and Honda Civic. Expand your workshop's customer base by offering increasingly comprehensive service on all vehicles that enter your workshop.

ECU Details:

• Bosch EDC15C7
• Bosch EDC17C72
• Bosch EDC16CP34
• Bosch ZF 6HP19

Meet all your customers' needs with Alientech's professional tools. This includes everything from performance tuning to fuel economy optimization, as well as ECU or TCU repair through reprogramming or cloning.

•  Bosch EDC15C7 HONDA

•  Bosch EDC17C72 HONDA

•  Bosch EDC16CP34 HYUNDAI

•  Bosch ZF 6HP19 HYUNDAI

Activate the CAR – BENCH/BOOT protocols to discover all the secrets of reprogramming and perform thorough interventions on each compatible ECU.

November 8, 2023

Reads and writes via OBD on the latest generation of John Deere tractors with the Phoenix L40 ECU.

Work quickly and efficiently thanks to the new KESS3 development dedicated to agricultural machinery.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.75

Reprogram the Phoenix L40 ECU installed in John Deere 7, 8, and 9 Series models via OBD. Improve performance, repair, and reduce fuel consumption in these powerful vehicles, and grow your business by meeting your customers' needs.

New ECU supported:

• Phoenix L40

Take advantage of the speed and reliability of KESS3 and offer precise and timely reprogramming services, working on dozens of vehicles that share the same engine operating logic.

•  Phoenix L40 JOHN DEERE

Activate truck/tractor OBD protocols and expand your market to new compatible vehicles.

November 15, 2023

Connect directly to the ECU connectors on Bosch MD1CS016 fitted to recent Renault engines.

Work safely thanks to the new "BENCH" protocol for KESS3 on the latest compatible vehicles.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.76

Discover all the secrets of the electronic management of the Bosch MD1CS016 control units installed in select Dacia, Nissan, and Renault models with 1.5 and 2.0 dCi engines. Create new business opportunities for your workshop with this latest development, optimizing performance to meet your customers' demands.

Details about the new switchboard:

• Bosch MD1CS016

With KESS3, tuning and repair are within reach of your workshop. Offer more comprehensive and effective service on thousands of new vehicles with constant tool updates, available only with an active subscription.

•  Bosch MD1CS016 DACIA, NISSAN, RENAULT

Check the CAR – BENCH/BOOT protocols and find out how to work on the new supported ECUs.

November 22, 2023

Reprograms in "bench mode" the Bosch MG1CS036 ECUs equipped in recent Ford SUVs and Pick-ups.

Works safely, directly from the control unit's OBD connector, in new compatible vehicles.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.77

Thanks to this new development, you can effectively work on the MG1CS036 ECU installed in the powerful Ford EcoBoost and Ti-VCT engines found in the F-150, Maverick, Ranger, Explorer, and Bronco models. Take advantage of this opportunity to meet your customers' needs with a fast, risk-free remapping service.

New ECU:

• Bosch MG1CS036

Increase your business opportunities by working on late-production vehicles thanks to the new KESS3 updates. Intervene to maximize performance, repair, or reduce fuel consumption with a single tool, on thousands of compatible vehicles.

•  Bosch MG1CS036 FORD

Choose to activate the CAR – BENCH/BOOT protocols and discover all the secrets of the ECUs available in Alientech Suite.

November 29, 2023

Reads and writes OBD data on Bosch MG1UA008 and Bosch MG1US008 control units fitted to some vehicles of the DFSK Motor, Proton and Baic brands.

Work in the easiest and fastest way to improve performance, reduce fuel consumption, or for repairs.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.78

Thanks to the two new protocols available for KESS3, you can work efficiently with Bosch MG1UA008 and Bosch MG1US008 control units that manage some 1.5 and 2.0 turbo gasoline engines for the Asian market. Create your profit opportunity by reprogramming the newly supported vehicles via the OBD port with maximum reliability.

Supported ECUs:

• Bosch MG1UA008
• Bosch MG1US008

Offer increasingly faster and more comprehensive service for any type of vehicle that enters your workshop. Meet your customers' needs daily with new and continuous developments, accessible only with an active KESS3 subscription.

•  Bosch MG1UA008 DFSK MOTOR, BAIC, PROTON

 

•  Bosch MG1US008, DFSK MOTOR

Activate CAR-OBD protocols and discover the advantages of using this connection mode in thousands of vehicles.

December 6, 2023

Works with open control unit of Continental SIM2K-2XX and Bosch MEDG17.9.8 ECU/TCU installed in some Hyundai and Kia models.

Now in KESS3, we have six new protocols to work on dozens of new vehicles.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.79

Activate "BOOT" mode on Hyundai and Kia vehicles with 1.6 GDI and 2.0 MPI gasoline engines by connecting directly to the memories of the Continental SIM2K-242, Continental SIM2K-253 ECUs, Continental SIM2K-259 ECU/TCUs, and Continental SIM2K-242 TCUs, as well as Bosch MEDG17.9.8. Expand your market with the growing job opportunities dedicated to the remapping of engine and automatic transmission control units, offering a complete and timely remapping, fuel consumption reduction, and repair service.

Supported ECUs:

• ECU - Continental SIM2K-242
• ECU - Continental SIM2K-253
• ECU - Continental SIM2K-259
• TCU - Continental SIM2K-259
• TCU - Continental SIM2K-242
• TCU - Bosch MEDG17.9.8

Meet the needs of your customers who come to your workshop with the latest compatible vehicle models. Work with Alientech's professional team and ensure reliable and effective service for every type of vehicle and all ECU connection modes.

•  ECU - Continental SIM2K-242 HYUNDA, IKIA

•  ECU - Continental SIM2K-253 HYUNDAI, KIA

•  ECU - Continental SIM2K-259 HYUNDA, IKIA

•  TCU - Continental SIM2K-259 HYUNDAI,KIA

•  TCU - Continental SIM2K-242 HYUNDAI,KIA

•  TCU - Bosch MEDG17.9.8 HYUNDAI

Activate CAR – BENCH/BOOT protocols and provide immediate communication in new compatible vehicles.

December 13, 2023

Works in BENCH mode with KESS3 on the latest compatible Bosch, Continental, and Delphi ECUs fitted to brands such as Porsche, Audi, Seat, Skoda, and Volkswagen.

Satisfy your customers' needs by working on the performance and repair of these engines.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.80

Expand your career opportunities with this new development dedicated to VAG group brands and ECUs such as Bosch EDC15VM+, Continental SDI9, Continental SIMOS16.XX, Delphi DCM6.2, Delphi DCM6.2 SPC5674, Continental SIMOS8.10, Continental SIMOS8.2 and Continental SDI10.X. Eight new protocols have been added to KESS3 to allow you to work on a wider range. Offer a comprehensive and personalized service to your customers, activate the CAR protocols with BENCH and BOOT modes for effective work.

The newly supported ECUs are:

• Bosch EDC15VM+
• Continental SDI9
• Continental SIMOS 16.XX
• Delphi DCM6.2
• Delphi DCM6.2 SPC5674
• Continental SIMOS 8.10
• Continental SIMOS 8.2
• Continental SDI10.X

Choose KESS3 and connect directly to the ECUs to discover all the secrets of tuning. Improve performance or reduce fuel consumption in the newest vehicles at your disposal, including some of the most powerful Porsche and Audi models.

•  Bosch EDC15VM+ VOLKSWAGEN

•  Continental SDI9 PORSCHE

•  Continental SIMOS 16.XX AUDI
• Delphi DCM6.2 AUDI, SEAT, SKODA, VOLKSWAGEN

•  Delphi DCM6.2 SPC6574 AUDI, SEAT, SKODA, VOLKSWAGEN

•  Continental SIMOS 8.10 AUDI

•  Continental SIMOS 8.2 AUDI

•  Continental SDI10.X PORSCHE

It works comprehensively, including repairs on Bosch EDC15VM+ control units, for which the cloning function is also available.

December 20, 2023

Reprograms Bobcat S76 with Bosch EDC17C87 control unit and JCB Backhoe Loaders with Delphi DCM3.3+ ECU.

Intervene effectively using two new protocols dedicated to the world of construction vehicles.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.81

Work in BENCH/BOOT mode to meet your customers' demands with compact Bobcat S76s equipped with a Bosch EDC17C87 ECU and JCB Backhoe Loaders with a Delphi DCM3.3+ control unit. Repair and optimize the performance of these engines comprehensively, with a focus on reducing fuel consumption. Choose KESS3 with activation for both BENCH and BOOT truck/tractor protocols and increase your profits by expanding your business.

New ECUs supported:

• Bosch EDC17C87
• Delphi DCM3.3+

Thanks to the function available by opening the control unit (BOOT mode), you can clone the Delphi DCM3.3+ ECU, offering an even more effective repair service to your customers.

•  Bosch EDC17C87 Bobcat

 

•  Delphi DCM3.3+ JCB

Get an ever-impressive fleet of vehicles to work with with KESS3 and an active subscription, and don't miss out on any work opportunities on new compatible vehicles.

January 17, 2024

KESS3 world exclusive! OBD reprogramming on select Suzuki models with the Bosch MED17.9.63 engine control unit.

Acts quickly and effectively to optimize performance on newly supported vehicles.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.82

Work on Suzuki Baleno, Swift, SX-4, and Vitara, thanks to the new Virtual Reading protocol for KESS3. Expand your workshop's business opportunities with fast and accurate service dedicated to the Japanese manufacturer's small turbocharged gasoline engines. With KESS3, you'll not only perform remapping but also meet many other customer demands, such as fuel efficiency and repairs.

Details about the new switchboard:

• Bosch MED17.9.63

Work safely using KESS3's OBD mode, ensuring a new performance configuration for vehicles entering your workshop in just a few simple steps.

•  Bosch MED17.9.63 SUZUKI

This solution allows you to integrate a new and broader customer base. Activate CAR-OBD protocols to take advantage of this opportunity.

January 24, 2024

Works via OBD on Iveco S-Way with Bosch MD1CE101 ECUs.

Reschedule risk-free and increase your earning potential.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.83

A great opportunity is now available for your workshop: work quickly and effectively on the latest Iveco giants. Satisfy your customers by connecting to the Bosch MD1CE101 ECU via the OBD diagnostic port to manage the calibration parameters of Euro6-D Cursor engines.

New compatible ECU:

• Bosch MD1CE101

Choose KESS3 and expand your fleet, even in the heavy-duty transport sector, with new dedicated protocols. Offer a unique service by improving performance and reducing fuel consumption. Plus, use it for repairs when necessary.

•  Bosch MD1CE101 IVECO

Activate the TRUCK/TRACTOR – OBD protocols and start working immediately with KESS3 on the new Iveco S-Way.

January 31, 2024

OBD remaps Peugeot 208 and Citroen C1 and C3 with Valeo V56 ECUs.

Improves performance and reduces fuel consumption on the latest compatible vehicles.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.84

Thanks to KESS3, you can now quickly and effectively work on Valeo V56 ECUs fitted to 1.2 Pure-Tech and 1.0 VTi turbocharged gasoline engines in select PSA Group vehicles. To read information from the ECU for the first time, you must unlock the ECU by applying a patch on the bench in BOOT mode. Immediately after this operation, you can always reprogram via OBD.

New ECU:

• Valeo V56

With KESS3, you can provide a complete and professional service in every aspect, from tuning to repair, reprogramming hundreds of ECUs with a single tool. This increases your customer base and revenue opportunities for your workshop.

•  Valeo V56 CITROEN, PEUGEOT

Activate CAR – OBD or CAR – BENCH/BOOT protocols to work with maximum effectiveness in all connection modes on the latest compatible vehicles, included in the subscription.

February 7, 2024

TCU Magneti Marelli CFC333R and CFC308: works on ZF and Dualogic transmissions on the bench (BOOT mode).

It is involved in the electronic management of robotic transmissions fitted in Renault Master III and some FCA group vehicles.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

Upgrade 1.85

Attract more customers with KESS3 and TCU remapping in your workshop. Thanks to this new development, you can work on transmissions with Magneti Marelli TCUs: CFC333R and CFC308. Expand the range of available services by working effectively to repair or improve driving pleasure in newly supported vehicles.

New TCUs:

• Magneti Marelli CFC333R
• Magneti Marelli CFC308

Activate CAR – BENCH/BOOT protocols on your KESS3 and enable cloning of the Magneti Marelli CFC333R control unit, adding a more comprehensive and specialized service to your repair.

•  Magneti Marelli CFC333R RENAULT

•  Magneti Marelli CFC308 FIAT, LANCIA

February 14, 2024

Bank reprograms the Magneti Marelli MM10JA and IAW 11GF ECU installed on some FCA group models.

Works in both BENCH and BOOT modes to fully meet your customers' needs.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.86

We work on Magneti Marelli MM10JA and IAW 11GF ECUs thanks to two new protocols now available in KESS3. Effectively increasing performance and reducing fuel consumption on ECUs for Alfa Romeo Giulia and Stelvio with 2.0-liter turbo gasoline engines and Fiat 500, Panda, and Lancia Y with 1.0-liter Firefly hybrid engines, creating new opportunities for your workshop.

Focus on the new ECUs:

• Magneti Marelli MM10JA
• Magneti Marelli IAW 11GF

With an active KESS3 subscription, you can offer a complete and reliable reprogramming service on all new vehicles available in the Alientech Suite: choose the tool configuration that best suits your needs and start working immediately.

•  Magneti Marelli MM10JA ALFA ROMEO

•  Magneti Marelli IAW 11GF FIAT, LANCIA

This new development also allows you to clone the Magneti Marelli MM10JA ECU: it activates CAR – BENCH/BOOT protocols immediately and works for both tuning and repair purposes.

February 21, 2024

Bench-tested dozens of new Bosch ECU-compatible vehicles, including MG1UA008 (JAC), MD1CS018 (Isuzu), and MEG17.9.77 (Perodua).

Satisfy your customers' needs with dedicated engine tuning and repair services.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.87

Increase your heavy-duty vehicle workshop's profit potential with a comprehensive cloning service for the Bosch DCU15C167 installed in Yutong trucks, as well as the Continental SID605 ECUs that manage the Weichai engines in Doosan and Shacman vehicles. It also works in "BENCH" mode on the Bosch EDC16C8 ECUs installed in Volkswagen trucks and the Bosch MD1CC898 ECUs installed in the latest Mahindra trucks.

New compatible ECUs:

• Bosch DCU15C167
• Bosch EDC16C8
• Continental SID605
• Bosch MD1CC898

Take advantage of the opportunity to work on vehicles from around the world to expand your experience and stand out in the market, offering quality services not only for heavy-duty vehicles but also for a wide range of vehicles.

• Bosch DCU15C167
•  Bosch EDC16C8 VOLKSWAGEN

•  Continental SID605 DOOSAN, SHACMAN

•  Bosch MD1CC898 MAHINDRA

February 28, 2024

Bench-tested dozens of new Bosch ECU-compatible vehicles, including MG1UA008 (JAC), MD1CS018 (Isuzu), and MEG17.9.77 (Perodua).

Satisfy your customers' requests through dedicated engine tuning and repair services.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.88

Eight new BENCH mode protocols dedicated to various Asian-made vehicles are now available in KESS3. Grow your business with reliability and effectiveness, and work on Bosch ECUs such as the MG1UA008, MD1CS018, EDC17C69, MEG17.9.77, ME17.9.21.1, MG1US008, MED17.8.21, and ME17.9.56.

Supported ECUs:

• Bosch MG1UA008
• Bosch MD1CS018
• Bosch EDC17C69
• Bosch MEG17.9.77
• Bosch ME17.9.21.1
• Bosch MG1US008
• Bosch MED17.8.21
• Bosch ME17.9.56

It offers an increasingly comprehensive service, also capable of cloning Bosch EDC17C69 and MEG17.9.77 ECUs. Meet your customers' needs with ongoing new developments in KESS3, available only with an active subscription.

•  Bosch MG1UA008 DSFK MOTOR, PROTON, BAIC

•  Bosch MD1CS018 ISUZU

•  Bosch EDC17C69 TATA

•  Bosch MEG17.9.77 DAIHATSU, PERODUA, TOYOTA

•  Bosch ME17.9.21.1 HYUNDAI, KIA

•  Bosch MG1US008 DSFK MOTOR

•  Bosch MED17.8.21 FOTON MOTOR

•  Bosch ME17.9.56 HONDA

Activate the CAR – BENCH/BOOT protocols and discover the advantages of this connection mode in thousands of vehicles.

March 6, 2024

Work on bench on ECU Bosch ME7.6.2, Hitachi BED501, and other ECUs dedicated to European brands for tuning or repairing.

Reprogram many Ford, FCA, Opel, PSA, Renault and Mercedes vehicles meeting your customers' needs.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.89

Boost your business with seven new protocols developed to work on the bench with Bosch ME7.6.2, Bosch EDC15C6, Siemens Sirius 81, Hitachi BED501, Lucas DCU3F, Visteon ESU-132, and Bosch EDC15C2-10 ECUs. Meet your customers' needs with service focused on both performance and repair, especially for work on older vehicles that are still an essential part of your fleet.

Supported ECUs:

• Bosch ME7.6.2
• Bosch EDC15C6
• Siemens Sirus 81
• Hitachi BED501
• Lucas DCU3F
• Visteon ESU-132
• Bosch EDC15C2-10

Thanks to KESS3, you can now also clone Bosch ME7.6.2 and Bosch EDC15C2-10 ECUs. Reprogram thousands of potential vehicles compatible with this new version with the best results and satisfy every customer who enters your workshop.

•  Bosch ME7.6.2 CHEVROLET, HOLDEN, LOTUS, OPEL, SATURN, VAUXHALL

•  Bosch EDC15C6 MERCEDES-BENZ

•  Siemens Sirus 81 CITROEN, PEUGEOT

•  Hitachi BED501 ALPINE, RENAULT

•  Lucas DCU3F FIAT

•  Visteon ESU-132 FORD

•  Bosch EDC15C2-10 CITROEN, FIAT, LANCIA, PEUGEOT, SUZUKI

Activate the CAR – BENCH/BOOT protocols and discover how you can intervene for tuning or repair purposes.

March 13, 2024

Remapping of engine mounts on several Benelli, CF Moto, Honda, Kawasaki, Suzuki and Yamaha motorcycles

Work with eight new protocols dedicated to two-wheeled vehicles and satisfy your customers.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPDATE 1.90

Works effectively on Mitsubishi 21175-1124/1125, Denso 32910-10LXX, Denso BXX-8591A-XX, Keihin 38770-MXX, Keihin 38770-MXX-AXX-DXX, Mitsubishi F8T9647X, Denso 32920-41GXX and Delphi MT05.3 ECUs. Build your business in the performance field and beyond by working on all aspects of the new supported ECUs' management file.

New ECUs:

• Mitsubishi 21175-1124/1125
• Denso 32910-10LXX
• Denso BXX-8591A-XX
• Keihin 38770-MXX
• Keihin 38770-MXX-AXX-DXX
• Mitsubishi F8T9647X
• Denso 32920-41GX
• Delphi MT05.3

Modify engine parameters according to your customers' needs to optimize performance or unleash their full potential. Choose KESS3 to launch your motorcycle remapping business and expand your workshop's reach.

•  Mitsubishi 21175-1124/1125 KAWASAKI

•  Denso 32910-10LXX SUZUKI

•  Denso BXX-8591A-XX YAMAHA

•  Keihin 38770-MXX HONDA

•  Keihin 38770-MXX-AXX-DXX HONDA

•  Mitsubishi F8T9647X SUZUKI

•  Denso 32920-41GX SUZUKI

•  Delphi MT05.3 BENELLI, BRIXTON, CF MOTO, KEEWAY MOTOR, MOTRON,SWM

Activate the BIKE–MOTORCYCLE-BENCH/BOOT package and work on new compatible vehicles immediately. Remember, the KESS3 update is only available with an active subscription.

March 20, 2024

Works on new compatible ECUs for Japanese brands in BENCH and BOOT modes.

Efficiently reprograms various vehicles from Subaru, Lexus, Mazda and Suzuki brands.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.91

Thanks to the eight new protocols available in KESS3, you can bench-test Denso 112731-5040, Denso 112800-3288, Denso 275236-0011, Denso 279721-3830, Denso ZYE9, Denso L831, Denso 112331-0380, and Denso 33910-057LX engine control units. Work on dozens of Japanese-made vehicles to satisfy your customers.

New supported ECUs:

• Denso 112731-5040
• Denso 112800-3288
• Denso 275236-0011
• Denso 279721-3830
• Denso ZYE9
• Denso L831
• Denso 112331-0380
• Denso 33910-057LX

Choose KESS3 and take advantage of the opportunity to increase performance, reduce fuel consumption, or repair issues by working on new compatible ECUs. It even works for cloning purposes on Denso 112731-5040, Denso L831, and Denso 112331-0380 engine control units.

•  Denso 112731-5040 SUBARU

•  Denso 112800-3288 SUBARU

•  Denso 275236-0011 LEXUS, TOYOTA

•  Denso 279721-3830 MAZDA

•  Denso ZYE9 MAZDA

•  Denso L831 MAZDA

•  Denso 112331-0380 SUBARU, SUZUKI

•  Denso 33910-057LX SUZUKI

Activate CAR – BENCH/BOOT protocols to expand your client base thanks to the continuous updates available in KESS3.

March 27, 2024

Reprograms Triumph, KTM and Ducati ECUs with Keihin 6001-19PE-002, Keihin RH850 and Continental Siemens VDO M3C S12X256SV/S12XET256MAL control units.

Satisfy your customers with five new motorcycle protocols now available in KESS3.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.92

Work to improve performance or for repair purposes on the newly supported ECUs for Triumph, KTM, and Ducati brands. Thanks to this new development, you can expand your customer base in the two-wheeler sector by offering a comprehensive remapping service on the latest production motorcycles.

New compatible ECUs:

• Keihin 6001-19PE-002
• Keihin RH850
• Continental Siemens VDO M3C S12X256SV
• Continental Siemens VDO M3C S12XET256MAL

It unlocks the full potential of these engines installed in both the 2-stroke and 4-stroke motorcycles involved in this development. But that's not all. It also clones Ducati Continental Siemens VDO M3C S12X256SV and Continental Siemens VDO M3C S12XET256MAL ECUs.

•  Keihin 6001-19PE-002 TRIUMPH

•  Keihin RH850 KTM

• Continental Siemens VDO M3C S12X256SV
•  Continental Siemens VDO M3C S12XET256MAL, DUCATI

• Continental Siemens VDO M3C S12X256SV
•  Continental Siemens VDO M3C S12XET256MAL, GAS GAS, HUSQVARNA, KTM

• Continental Siemens VDO M3C S12X256SV
•  Continental Siemens VDO M3C S12XET256MAL, GAS GAS, HUSQVARNA, KTM

Activate the BIKE – BENCH/BOOT protocols and, with an active subscription, start working immediately on new compatible ECUs.

April 10, 2024

Reads and writes via OBD the Bosch MSE8.0 ECU installed in the Zontes and CF Moto brands.

Works quickly and effectively on newly supported motorcycles and ATVs.

LATEST UPDATES AND NEWS FROM THE ALIENTECH WORLD!

UPGRADE 1.94

Thanks to this new development for KESS3, you can reprogram the Bosch MSE8.0 engine control unit installed in CF Moto's CForce range and Zontes' small-displacement ZT models via OBD.

New ECU:

• Bosch MSE8.0

Satisfy your customers with a comprehensive remapping service and extremely fast turnaround times, unlocking the full potential hidden within the parameters of supported vehicle ECUs.

•  Bosch MSE8.0 CF MOTO, ZONTES

Activate the BIKE-OBD package and increase your workshop's job opportunities. And if you don't want to miss any updates, maintain your subscription and take advantage of the technological benefits available to you.